CRESTRON
2
••
CNX MIDI Interface Expansion Card: CNXMIDI
Operations Guide - DOC. 8128
Leading Specifications
The table below provides a summary of leading specifications for the CNXMIDI.
Dimensions and weight are approximations rounded to the nearest hundredth unit.
Leading Specifications of the CNXMIDI
DETAILS
Connectors
(3) 5-pin DIN connectors
Power Requirements
24VDC, network power; 4 Watts
SIMPL™ Windows®
Version 1.21.03 or later
CNX Operating System
Version 5.01.29x or later
CNX Monitor
Version 2.05x or later
Dimensions:
Height
0.98 in (24.9 mm)
Width
5.00 in (127 mm)
Depth
6.58 in (167.1 mm)
SPECIFICATIONS
As of the date of manufacture, the unit has been tested and found to comply with
specifications for CE marking.
Setup
Installation
Items required to install the CNXMIDI are already attached to the unit. The only
tools required are a Phillips tip screwdriver and a grounding strap. Follow the
assembly procedure below.
CAUTION:
The CNXMIDI contains electrostatic sensitive devices (ESD); observe
precautions for handling ESDs to avoid damaging the card.
NOTE:
If installing the CNXMIDI into a CNMSX-AV, it is assumed that the
CNXCAGE has been installed.
1.
Disconnect power from the CNMSX.
2.
Use the Phillips tip screwdriver and remove two screws and blank
faceplate from the control system.
3.
Align the CNXMIDI with the card guides in the open slot and slide
the expansion card into position.
4.
Firmly press both ends of the CNXMIDI faceplate to seat the
expansion card into the control system connector.
5.
Tighten the thumb screws to secure the CNXMIDI to the control
system.
6.
Reapply power to the CNMSX.