Crestron CNX-TS, Руководство по эксплуатации и установке, Страница: 17 / 24

Crestron CNX-TS Single Gang Temperature Sensor
Programming with VT Pro-e
To play WAV files, a CNX-TS project must be created in VT Pro-e (with
the WAV files and correct join numbers as part of the project).
NOTE : If you need to create WAV files, refer to Windows Help (Using
Sound Recorder).
NOTE : Join numbers assigned to a WAV file in VT Pro-e begin at 20
because join numbers below 20 are already assigned to other sensor
buttons or functions.
Once the project is created, use File | Upload Project from the VT Pro-e
main menu to load it in the CNX-TS. For more information, refer to the
VT Pro-e help file.
NOTE : This can be done after an identity code (NET ID) is assigned to
the sensor (page 6) or after installation (page 7).
Problem Solving
Troubleshooting
The table below provides corrective action for possible trouble situations.
If further assistance is required, please contact a Crestron customer
service representative.
CNX-TS Troubleshooting
TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION
No temperature
indication. Wrong NET ID. Poll network. Verify SIMPL
Windows program for setting
Net ID.
Cables not connected or
connected incorrectly. Check cable connections.
Wrong or incorrect SIMPL
Windows program. Verify SIMPL Windows
program for enabling sensor.
No sound from
speaker. Feedback audio signal not
present. Verify VT Pro-e program for
feedback audio signals.
Operations & Installation Guide - DOC. 8191 Single Gang Temperature Sensor: CNX-TS
•
13