CRESTRON
Operations Guide - DOC. 8130
Wired 8 Button Control Panel: CNWM-8
••
5
Use the Programming Manager workspace in SIMPL Windows to select symbols
and assign their respective signals. Expand the Network Module folder and double
click on the CNWM-8 for a detail view (alternatively CTRL+D), shown below.
Assign the signals.
NOTE:
As a reference when programming, external buttons on the CNWM-8 are
numbered 1 through 8 starting from the lower right corner to the upper left corner
(when silk-screened text on rear panel is upright).
Graphical Detail View of CNWM-8 in SIMPL Windows’ Programming Manager
For this simplified example, there are two TOGGLE symbols used, shown after this
paragraph. Each has its own unique output triggered by a specific button depression
on the CNWM-8.
Graphical Detail View of TOGGLE in SIMPL Windows’ Programming Manager
