Crestron CNRFGWA, Руководство по эксплуатации

Страница: 8 / 20

Wireless RF Receiver Crestron CNRFGWA
4
•
Wireless RF Receiver: CNRFGWA Operations Guide - DOC. 8086A
SIGNAL
This red LED illuminates when the CNRFGWA receives a valid signal from a
wireless touchpanel or remote.
I.D. SELECT
This red LED illuminates when communication with the Cresnet system and the
CNRFGWA is established (the unit is polled on the network). Illumination indicates
that the SIMPL Windows program currently loaded has a network device defined at
the same Net ID code as the CNRFGWA.
NET POWER
This green LED illuminates when Cresnet power is supplied to the CNRFGWA.
Industry Compliance
As of the date of manufacture, this unit has been tested and found to comply with
specifications for CE marking and standards per EMC and Radio Communications
Compliance Labeling (N11785).
NOTE: This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. The equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
■ Reorient or relocate the receiving antenna.
■ Increase the separation between the equipment and transceiver.
■ Connect the equipment into an outlet on a circuit different from that to which the
transceiver is connected.
■ Consult the dealer or an experienced radio/TV technician for help.