Crestron CNRFGWA, Руководство по эксплуатации

Страница: 14 / 20

Wireless RF Receiver Crestron CNRFGWA
10
•
Wireless RF Receiver: CNRFGWA Operations Guide - DOC. 8086A
Uploading a SIMPL Windows Program
A control system source file has
the extension .smw. A compiled
SIMPL Windows file has the
extension .spz for a 2-Series
control system, .bin for CNX
generation, and .csz for CNX
generation with SIMPL+. The SIMPL Windows file can be uploaded to the control system using SIMPL
Windows or via the Crestron Viewport.
Upload via SIMPL Windows
1. Start SIMPL Windows.
2. Select File | Open to view the “Open” window, navigate to the
SIMPL Window file (.smw), and click Open .
3. Select Project | Transfer Program .
Upload via Crestron Viewport
1. Verify that the procedure for “Communication Settings” that begins on
page 8 has been performed.
2. As shown below, select File Transfer | Send Program (Alternatively,
press Alt+P ) from the Viewport menu.
File transfer | Send Program Command
3. The “Send Program” window appears as shown after this step. Click
Browse , locate the completed file (.spz for PRO2) and click Open .
This displays the program’s header information and enables one or both
of the
What to Send check boxes. If the program does not contain any
SIMPL+ modules, only the SIMPL Program check box is enabled. If it
does contain SIMPL+ modules, then the SIMPL+ Program(s) check
box will also be enabled. Select one or both check boxes and then click
Send Program to begin the transfer.
NOTE: Refer to the respective Operations Guide for control system details about the
other fields in the “Send Program” window.
“Send Program” Window