Crestron CHV-THSTAT, Руководство по эксплуатации и установке, Страница: 88 / 100

Thermostats Crestron CHV-TSTAT and CHV-THSTAT
ID Strings Description
FUNCTION OPTIONS DESCRIPTION
System T ype H/C, HP, SB1,
SB2, SB3,
SB4A, SB4B,
SB5A, SB5B
Heat/cool, heat pump, or slab system
System Type Suffix RD
FA
DF
AX Radiant
Forced Air
Heat pump with Dual Fuel
Heat pump with Auxiliary
Heat S tages H1, H2 Number of heating stages, 1 or 2
Cool S tages C1, C2 Number of cooling stages, 1 or 2
Heat A nticipator HA1 - HA6 Heat anticipator setting, from 1-6
Cool A nticipator CA1 - CA6 Cooling anticipator setting, from 1 - 6
Slab Temperature Max SMX Maximum slab temperature for Slab2, Slab3, Slab4A ,and Slab4B types
followed by a number (example: SMX100)
Regulation Index SRG Floor warming regulation index for Slab1, Slab3, Slab5A, and Slab5B
types followed by a number (example: SRG4)
Interstage Differential ID Differential for multistage heat/cool, heat pump, Slab4A, and Slab4B
types followed by a number (example: ID1.0)
Heat Pump Balance Point HBP Balance point for heat pump, Slab4B, and Slab 5B types followed by a
number (example: HBP-10)
Aux Balance Point ABP Balance point for heatpump, Slab4B, and Slab5B types followed by a
number (example: ABP70)
Offset Temperature OS Offset temperature display value, followed by a number from -6 to 6
degrees (Example: OS-1)
Auto Deadband ADB Minimum separation between heat and cool setpoints in auto mode,
degrees, 2 – 6, for systems containing cooling only (Example: ADB3)
Temperature U nit F
C10
C05 Fahrenheit
Celsius whole units
Celsius half units
Sensor U sage F lags U, D, O Indicates the status of each sensor input: Use, outDoor, or Omit, sensor
series is as follows:
Built-in-temp; built-humidity; remote 1 temp; remote1 hum; remote 2
temp; remote 2 hum.
NOTE: Depending on system type, not all of the ID String options listed above will
be present.
NOTE: If you are in setup, the word SETUP appears in the string after the list of
sensors.
NOTE: If you have restored a version 1.0 or 1.1 setup in this power cycle, an R
appears after the word SETUP.
82
•
Thermostats: CHV-TSTAT and CHV-THSTAT Operations and Installation Guide – DOC. 8163C