Crestron CEN-ERFGW-POE, Руководство по эксплуатации и установке

Страница: 26 / 40

Extended Range Wireless Gateway Crestron CEN-ERFGW-POE
Operation
Operating
Channel The operating channel of the CEN-ERFGW-POE must be set prior to
operation using Crestron Toolbox. The CEN-ERFGW-POE can operate
on one of 16 channels. The CEN-ERFGW-POE can operate on a fixed
channel that is set by the installer. The default RF channel is 20.
For optimum performance when installing a CEN-ERFGW-POE in a
Wi-Fi environment, do not set the CEN-ERFGW-POE to a channel
within a Wi-Fi channel band. Crestron recommends channel 15 or
channel 20.
•
Gateway channels 11-14 are within Wi-Fi channel 1 band.
•
Gateway channel 15 is adjacent to Wi-Fi channels 1 and 6.
•
Gateway channels 16-19 are within Wi-Fi channel 6 band.
•
Gateway channel 20 is adjacent to Wi-Fi channels 6 and 11.
•
Gateway channels 21-24 are within Wi-Fi channel 11 band.
•
Gateway channel 25 is adjacent to Wi-Fi channel 11.
•
Gateway channel 26 is neither within or adjacent to any Wi-Fi
band.
For detailed information on RF channels, refer to “Appendix A: The RF
Spectrum” on page 31.
After establishing communication with the CEN-ERFGW-POE (refer to
“Establishing Communication” which starts on page 18), use Crestron
Toolbox to set the operating channel.
RF Channel
& RF Power
Level Each gateway can communicate with up to 16 wireless devices on the
same channel. Each device must have an RF channel assignment that
matches the RF channel assignment of the gateway.
There are 16 possible channels ranging from 11 to 26.
If two or more gateways are operating in close proximity and
experiencing interference problems, changing the RF power level to
reduce signal strength, may reduce interference.
Setting RF channel is done from a PC via Crestron Toolbox. To access
this in Toolbox, select
Functions | High Power RF Gateway… . Refer to
22
•
Wireless Gateway: CEN-ERFGW-POE Operations & Installation Guide – DOC. 7158A