Crestron
CEN-COM
Ethernet
RS-232/422
COM
Module
the help file in SIMPL Windows. From the Contents search on Symbol Card File or
from the Index search on the names of the symbols for details.
How to Create the Program
Configuration Manager
Use the Configuration Manager workspace (
Project | Configure System
) in SIMPL
Windows to select and configure all the devices that need to be included into the
system. For this example, from the Control Systems folder in the
Device Library
select CNMSX-PRO. Drag and drop the CT-3500 (Touchpanels (Wired) folder in
the
Device Library
) and CEN-COM (Ethernet Control Modules folder) into
System
View
. For this example, the NET ID of the touchpanel must be set to 03 and the
CEN-COM IP Net Address must be set to 03, shown below and on the next page.
NOTE:
SIMPL Windows v1.30.01 or later and release 45 of the .tio files (refer to
“Leading Specifications” on page 6) are required to program the control system
containing a CEN-COM. If using an earlier version of SIMPL Windows, Crestron
recommends a SIMPL Windows and complete CNX upgrade. The latest versions can
be obtained from the Software Downloads page (SIMPLWIN and OPSYS Libraries)
of Crestron’s website (
. New users are required to register in
order to obtain access to the FTP site.
System View of the CT-3500 in SIMPL Windows’ Configuration Manager
Operations Guide - DOC. 5719
Ethernet RS-232/422 COM Module: CEN-COM
•
15
