Crestron CAT5, Справочное руководство

Страница: 44 / 52

Reference Guide Crestron CAT5 Wiring
C2N-NPA8 Poll Accelerator LAN Connector
An 8-position RJ45 port is used for an Ethernet connection to a control system with
Ethernet capabilities.
NOTE: Only one C2N-NPA8 can be connected to a control system.
LAN RJ-45 Connector
PIN # SIGNAL
1 TD +
2 TD -
3 RD +
4 Connected to pin 5
5 Connected to pin 4
6 RD -
7 Connected to pin 8
8 Connected to pin 7
1 2 3 4 5 6 7 8
The QuickMedia Transport System
Using a new, proprietary signal routing solution, signals such as composite video,
S-video, RGBHV, audio, microphone and control, are all transported using a single
cable solution called QuickMedia™ (QM).
The QuickMedia Transport System port is capable of managing computer, video, and
audio signals simultaneously through one CAT5E/UTP wire, simplifying
MediaManager installations.
Routing CAT5E/UTP cable is less expensive and much simpler than routing multi-
colored, multi-conductor coax cable. All Crestron products using the QuickMedia
Transport System are capable of sending and receiving QuickMedia signals via
standard CAT5E/UTP cable. Crestron recommends Belden Media-Twist cable, and
Crescat-QM. Installation of any QuickMedia device is as simple as installing one set
of QuickMedia wires from output to input. Installations are flexible, affordable, and
fast.
The Crescat-QM cable contains one CAT5E cable and one Cresnet cable in a
siamese jacket.
40
•
Crestron CAT5 Wiring Reference Guide - DOC. 6137A