Crestron C2N-IRGW-F, Руководство по эксплуатации и установке

Страница: 17 / 32

Crestron C2N-IRGW-F IR Gateway
“Appendix: Mapping Table” on page 24 contains a table to record
this information. Create as many copies of the table as necessary.
3. Click the Clear button in the “Identify Transmitter” window to
reset the setup.
4. Press a single button on the universal remote and observe the
“Identify Transmitter” window.
5. Record the button title and ID for the action in step 4.
6. Repeat steps 4 and 5 for each button that is to be mapped. Refer to
the sample after this step.
Sample of Completed Mapping Table
7. Repeat this entire procedure (steps 2 through 6) for each source
selection button on the universal remote that requires
programming.
Operations & Installation Guide – DOC. 6574A IR Gateway: C2N-IRGW-F
•
13