Crestron C2N-IRGW-F, Руководство по эксплуатации и установке

Страница: 10 / 32

IR Gateway Crestron C2N-IRGW-F
Setup
Network Wiring
When wiring the network, consider the following:
•
Use Crestron Certified Wire.
•
Use Crestron power supplies for Crestron equipment.
•
Provide sufficient power to the system.
CAUTION: Insufficient power can lead to unpredictable results
or damage to the equipment. Please use the Crestron Power
Calculator to help calculate how much power is needed for the
system (
http://www.crestron.com/calculators ).
•
For larger networks, use a Cresnet Hub/Repeater (CNXHUB) to
maintain signal quality.
For more details, refer to “Check Network Wiring” on page 21.
Identity Code
The Net ID of the C2N-IRGW-F has been factory set to 2D . The Net IDs
of multiple C2N-IRGW-F devices in the same system must be unique.
Net IDs are changed from a personal computer (PC) via the Crestron
Toolbox™ (refer to “Establishing Communication” on page 18).
When setting the Net ID, consider the following:
•
The Net ID of each unit must match an ID code specified in the
SIMPL Windows program.
•
Each network device must have a unique Net ID.
For more details, refer to the Crestron Toolbox help file.
Installation
When choosing a location for the C2N-IRGW-F, consider how reception
varies with the angle of incidence of the signal from the transmitter (refer
to illustrations on the next page).
6
•
IR Gateway: C2N-IRGW-F Operations & Installation Guide – DOC. 6574A