Crestron C2N-CAMIDJ Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 36

Crestron C2N-CAMIDJ Скачать руководство пользователя страница 7

Crestron

C2N-CAMIDJ

Digital Joystick Camera Controller

Operations Guide – DOC. 6341

Digital Joystick Camera Controller: C2N-CAMIDJ

•

3

Specifications

The table below provides a summary of specifications for the C2N-CAMIDJ.

Specifications of the C2N-CAMIDJ

SPECIFICATION DETAILS

Cresnet Power Usage

4 Watts (0.17 Amps @ 24 VDC)

Default Net ID

0D

Control System Update Files

1, 2

2-Series Control System

Version 2.004.CUZ or later

C2N-CAMIDJ Firmware

3

C2N-CAMIDJvx.xxx.x.upg or later

Controls
Function buttons

Joystick thumb switches
General purpose buttons

SETUP button

Encoder wheel

Joystick

(6) pushbuttons select the function controlled by

the encoder wheel, and lens functions
(2) select high/low speed positioning mode
(12) programmable pushbuttons, select
cameras or other functions as determined by
SIMPL program
(1) pushbutton used for setup of the unit’s
network ID
(1) controls lens focus and manual iris
adjustments; adjusts speed factor for pan, tilt,
and zoom functions
(1) three axis joystick (up/down, left/right, and
twist in/out) used to control pan, tilt, and zoom
functions

Operating Temperature

41° to 122°F (5° to 50°C)

Humidity

10% to 90% RH (non-condensing)

Overall Dimensions

Width: 9.44 in (23.98 cm)

Height: 5.33 in (13.54 cm)
Depth: 7.71 in (19.58 cm)

Weight

3.2 lb (4.5 kg)

1.

The latest versions can be obtained from the Crestron website. Refer to NOTE after last footnote.

2.

Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product
Catalog for a complete list of 2-Series control systems.

3. In

DETAILS,

vx.xxx.x

represents a version number.

NOTE

: Crestron software and any files on the website are for Authorized Crestron

dealers and Crestron Authorized Independent Programmers (CAIP) only. New users may
be required to register to obtain access to certain areas of the site (including the FTP site).

«
...
5
6
7
8
9
...
»

Содержание C2N-CAMIDJ





































Отзывы:

Нет отзывов