Crestron C2N-CAMIDJ, Руководство по эксплуатации, Страница: 25 / 36

Crestron C2N-CAMIDJ Digital Joystick Camera Controller
Operations Guide – DOC. 6341 Digital Joystick Camera Controller: C2N-CAMIDJ
•
21
CAMIDJ Input and Output Signal Descriptions (continued)
SIGNAL TYPE AND
NAME DESCRIPTION
Digital inputs: < fb1 > through
< fb12 >
Activates the LED feedback of the corresponding generic
pushbutton.
If used with the CamiDJ Interface, these inputs will be
connected to the
{{FB#>>C2N-CAMIDJ}} outputs of the
module. Activation of the signals indicates that the functions
have been selected.
fb1 = CAMI 1 selected
fb2 = CAMI 2 selected
fb3 = CAMI 3 selected
fb4 = CAMI 4 selected
fb5 = Preset 1 selected
fb6 = Preset 2 selected
fb7 = Preset 3 selected
fb8 = Preset 4 selected
fb9 = Preset 5 selected
fb10 = Preset 6 selected
fb11 = Preset 7 selected
fb12 = Preset speed adjust selected
High/1 = Activate LED; Low/0 = Release LED
Digital outputs: < press1 >
through < press12 >
Indicates that the corresponding generic pushbutton has been
pressed. The output remains high for as long as the button is
pressed.
If used with the CamiDJ Interface, these outputs will be
connected to the
{{C2N-CAMIDJ>>Press#}} inputs of the
module and will trigger the following functions:
press1 = Select CAMI 1
press2 = Select CAMI 2
press3 = Select CAMI 3
press4 = Select CAMI 4
press5 = Select Preset 1
press6 = Select Preset 2
press7 = Select Preset 3
press8 = Select Preset 4
press9 = Select Preset 5
press10 = Select Preset 6
press11 = Select Preset 7
press12 = Select Preset speed adjust
High/1 = Generic button pressed;
Low/0 = Generic button released
Analog output: < Pan >
Reports the current pan position (left-right axis) of the joystick.
Reported values will range from 0xFFFF at full left, to 0x0000
at full right. A value of 0x8000 denotes the center spring back
position.
This output is connected to the
CamiDJ Interface input
{{C2N-CAMIDJ>>Pan}} .
Analog output: < Tilt >
Reports the current tilt position (up-down axis) of the joystick.
Reported values will range from 0xFFFF at full down, to
0x0000 at full up. A value of 0x8000 denotes the center spring
back position.
If used with the CamiDJ Interface, this output will be
connected to the
{{C2N-CAMIDJ>>Tilt}} input of the module.
(continued on next page)