Crestron BB-3000L, Руководство по установке

Страница: 8 / 12

Wall Mount Back Box Crestron BB-3000L
Mounting
Required Tools:
#2 Phillips tip screwdriver or hammer
Level
Complete the following procedure (refer to illustration below) to mount the
assembly.
1. Position assembly to front edge of stud and align it as even and as flush
as possible.
2. Use the level and verify that the back box is horizontal. Leveling must
be done before proceeding.
3. Attach the assembly to the left or right side of the stud with standard
drywall screws or nails (supplied by other). If the mounting brackets
cannot be used due to the box location (i.e. above/below a crossbeam),
remove the brackets and attach the assembly to the left or right side of
stud using the 4 holes on the side of the enclosure.
4. Feed cables through knockout holes.
NOTE: Video connections using the BNC connection must use Right-Angle BNC
connectors (supplied by other) to avoid excess stress on the cable.
Mounted View with Cover Plate (Mounting Example - Drywall Not Shown)
METAL COVER PLATE MTCVO2883-1
USE TO COVER CUTOUT IN THE
DRYWALL IF TOUCHPANEL IS NOT
INSTALLED (OPTIONAL).
(4) #6-32 x 1-1/2"L
(SR06-32-15000-2)
PAN HEAD SCREW
IT IS IMPORTANT THAT THESE
2 SURFACES BE AS EVEN AND
FLUSH AS POSSIBLE WHEN
MOUNTING BACKBOX
BACK BOX MUST BE MOUNTED
TO THE STUD AS LEVEL AS
POSSIBLE.
4
•
Wall Mount Back Box: BB-3000L Installation Guide - DOC. 6022