Crestron Antenna System SRD-ANT-4-PAK, Руководство по установке

Страница: 5 / 20

Crestron SRD-ANT-4-PAK Antenna System
Antenna System:
SRD-ANT-4-PAK
Introduction
The SRD-ANT-4-PAK is a high quality outdoor antenna system designed for use
with up to four Crestron
®
XM or SIRIUS
®
satellite radio tuners. The inclusion of an
SRD-SPL-4 Four-Way Amplified Splitter enables distribution of the antenna signal
to four separate tuners while allowing the antenna to be positioned up to 200 feet
(cable length) from the tuners using standard RG-6 cable (not included).
The antenna features a considerably narrower beam width compared to standard
consumer antennas, achieving superior gain and multi-path rejection. Additional
front end filtering provides excellent rejection to nearby out-of-band RF signals from
sources such as Wi-Fi, cellular telephones, and cordless telephones.
A wall mount bracket with elevation and azimuth adjustments is provided for
installation of the antenna to any horizontal or vertical flat surface. The additional
U-bolt and saddle enable mounting to a pole (not included) up to two inches in
diameter. Connections between the antenna and splitter are achieved using industry
standard RG-6 cable and F-type connectors (not supplied).
Four 3-foot F-to-SMB adapter cables are included for connecting each tuner to the
splitter outputs. If needed, standard RG-6 cable with male F-connectors (not
supplied) may be used to extend the output cable lengths up to 70 feet from each
individual splitter output to the tuners. Adding an SRD-AMP-1 line amplifier (sold
separately) at the input of the splitter will enable longer output cable lengths of up to
200 feet each.
NOTE: Unused splitter outputs do not have to be terminated for proper operation.
A 20 dB power passing attenuator is also included for use in preventing overload of
the splitter input in any installation that is located near a high power satellite radio
terrestrial repeater.
Installation Guide – DOC. 6723A Antenna System: SRD-ANT-4-PAK
•
1