Line Input Connection
If an unbalanced connection from a line input is required, use a jumper
between the negative (-) and ground (G) terminals.
Speaker Connections
The speaker outputs can be wired conventionally or they can be bridged to
deliver higher power. Refer to the following illustrations when connecting
speakers.
WARNING:
This amplifier is capable of delivering high power to the
loudspeakers. Please use caution and wear adequate hearing
protection if listening at high volume, as continued exposure to high
sound pressure levels can cause permanent hearing impairment or
loss.
Speakers are bridged with the Crestron Avia™ Audio tool, which can be
downloaded from
. The possible bridging
combinations are Output 1 & Output 2, Output 3 & Output 4,
Output 5 & Output 6, and Output 7 & Output 8.
NOTE:
The minimum load impedance for bridged channels is 8 ohms.
4
AMP(I)-8075 and AMP(I)-8150
Quick Start
Crestron® 8-Channel Commercial Amplifiers
