To install the included rear mounting brackets:
1. Use a #1 Phillips screwdriver to remove the four screws from the rear
of the amplifier as shown in the following illustration.
2. Use the four screws removed in the previous step to attach the
mounting brackets to the rear of the amplifier.
Then mount the device into the rack using four rack mounting screws (not
included).
Connect the Device
Connect the device as called out in the following illustrations. Connect
power last.
CAUTIONS:
l
Keep the device unplugged until all of the input, network, and
speaker wiring is complete.
l
Check the speaker cables for shorts and frayed wiring around the
SPEAKER OUTPUTS connectors.
NOTES:
l
Ensure the unit is properly grounded by connecting the chassis
ground lug to an earth ground (building steel).
l
To prevent overheating, do not operate this product in an area that
exceeds the environmental temperature range listed in the table of
specifications on the product web page. Fans provide side-to-side
airflow for cooling. Do not block the ventilation holes.
2
AMP(I)-8075 and AMP(I)-8150
Quick Start
Crestron® 8-Channel Commercial Amplifiers
