Cresta DTX390, Руководство пользователя

Страница: 20 / 45

SNOOZE FUNCTION
To activate the snooze function, follow the steps below
•
Press the key “ SNOOZE • LIGHT“ while the alarm sounds, to activate the snooze
function.
•
If the snooze function is activated, the alarm symbol is flashing.
•
The alarm repeats after 5 minutes.
•
The snooze function can be stopped by pressing any key.
•
The snooze function will last until you switch it off.
•
If you do not switch off the alarm it will last for 2 minutes and stop. In this case the
snooze function will also stop automatically.
12/24 HOURS MODE
The time display can be in 12 (AM/PM
）
or 24 hours mode.
°C/°F TEMPERATURE DISPLAY
The temperature display can be in °C or °F.
MAX/ MIN FOR THE INDOOR/OUTDOOR TEMPERATURE AND HUMIDITY
Press the “
∧
•MEM
“
button
for displaying the indoor/outdoor max./min. temperatures and
humidity’s.
TEMPERATURE ALERT SET-UP
•
Press the “ CH ” button to select the channel (1, 2, 3) if more than one outdoor sensors
are within reach.
•
Press the
“ALERT” button
to show the alert symbol
•
Hold the “ALERT” button , the upper limit temperature is flashing, use the
“
∧
•MEM
“
and
“
∨
•HISTORY
“
button to set the maximum alert temperature.
•
Press the
“ALERT” button
, the lower limit temperature is flashing, use the
“
∧
•MEM
“
and
“
∨
•HISTORY
“
button to set the minimum alert temperature.
•
When the alert is activated, the alert symbol will be shown.
.
TEMPERATURE ALERT ON/OFF
•
Press and hold the key “ALERT” to set the temperature alert ON or OFF.
•
Alert ON: Temperature alert symbol shown in display
•
Alert OFF: Temperature alert symbol goes out.
INFORMATION
•
A temperature alert can be set-up for each channel.
•
The set-up process cannot be completed if the maximum temperature selected is
lower than the minimum selected temperature.
•
The minimum temperature selected must be at least 1°C below the maximum
selected temperature.