Crest Audio Versarray Mk III FlyQWIK Скачать руководство пользователя страница 1

Страница: 1 / 16

Crest Audio® Versarray™ Mk III FlyQWIK™

Adjustable Rigging System

Crest Audio® Versarray™ VR218 Mk III Ground Stack Kit

Specifications and Instructions

CAUTION ! Before attempting to stack any Versarray™ 112 Mk III / Pro cabinets onto a Versarray™ 218

Mk III / Pro Sub, refer to a qualified professional. The Versarray™ 218 Mk III / Pro Sub and/or speaker

array can fall over from improper suspension, resulting in serious injury and property damage. Use only

the correct mating hardware. All associated rigging is the responsibility of others.

Description

The Crest Audio® Versarray™ VR218 Mk III Ground Stack Kit is designed to allow up to three of the

Versarray™ 112 Mk III / Pro cabinets to be stacked above a Versarray™ 218 Mk III / Pro Sub for ground

stack use. Brackets that bolt to the top of the Versarray™ 218 Mk III / Pro Sub, to interface with the

cabinet rigging hardware are provided, as well as Strapping Plates to provide for strapping the Sub

cabinet down and securing it to the stage or the ground are supplied.

This Kit is an optional piece of the overall rigging system, and it will not be needed if there is no need to

stack VR™ 112 Mk III / Pro cabinets on top of the VR™ 218 Mk III / Pro Sub.

Specifications:

Contents: Two Strap Stacking Brackets (L & R), one Rear Pivot Bar Bracket, two Strapping

Plates (L & R).

All required bolts are supplied on the VR™ 218 Sub, and the locking push pins

needed are included on the VR™ 112 Mk III / Pro cabinets.

Height added to Versarray™ 218 Mk III / Pro Sub: 4.93” (12.52 cm)

Material: 5 mm (approx. 7 Gauge) thick solid steel alloy.

Finish: All brackets and plates have a flat black powder coated paint finish.

Maximum Combined Total Stack Angle: Must be less than 30 degrees.

Maximum Number of Cabinets per Sub: No more than 3 maximum

Versarray™ 112 Mk III/ Pro two-way speaker cabinets can only be stacked on top of a Versarray™ 218 Mk

III / Pro Sub when the Sub is located on a substantially level surface, and secured to the stage or ground

with safety straps.

CAUTION ! The Crest Audio® Versarray™ Mk III Ground Stack Kit is designed to be used ONLY in

con- junction with the Versarray™ 218 Mk III / Pro Sub and the Versarray™ 112 Mk III / Pro two-way

speaker

cabinets! It is not designed to be used with any other brands of Subs or stacking cabinets!

Содержание Versarray Mk III FlyQWIK

















Результаты поиска

Содержание Versarray Mk III FlyQWIK

Отзывы:

Похожие инструкции для Versarray Mk III FlyQWIK

Бренды по названию

Популярные бренды

Crest Audio Versarray Mk III FlyQWIK, Технические характеристики и инструкции

Результаты поиска

Содержание Versarray Mk III FlyQWIK

Отзывы:

Похожие инструкции для Versarray Mk III FlyQWIK

Бренды по названию

Популярные бренды