Crest Audio Pro-LITE 2.0 / 3.0 Скачать руководство пользователя страница 35

Страница: 35 / 40

Crest

Pro-LITE

3.0 DSP Specification Sheet

Rated Power Bridged 4 ohms

3650 watts 20ms repetitive burst / 2960 watts 1% THD @ 1kHz.

Rated Power Bridged 8 ohms

2050 watts 20ms repetitive burst / 1850 watts 1% THD / 1680 watts 0.15%

THD @ 1kHz.

Rated Power 2ch x 2 ohms

1825 watts 20ms repetitive burst / 1480 watts 1% THD both channels driven

@ 1kHz.

Rated Power 2ch x 4 ohms

1025 watts 20ms repetitive burst / 925 watts 1% THD / 840 watts 0.15% THD,

both ch. driven @ 1kHz.

Rated Power 2ch x 8 ohms

550 watts 20ms repetitive burst / 500 watts 1% THD / 450 watts 0.15% THD,

both ch. driven @ 1kHz.

Minimum Load Impedance

2 ohms

Maximum RMS Voltage Swing

70 volts

Frequency Response

20 Hz - 22 kHz; +/-.05dB @ 4 ohms

20Hz - 20kHz 2ch x 2 ohms

<0.15% @ 1,300 watts 20 Hz to 3 kHz, decreasing to 1,000 watts @ 20 kHz,

both channels driven.

20Hz - 20kHz 2ch x 4 ohms

<0.15% @ 800 watts 20 Hz to 20 kHz, both ch. driven.

20Hz - 20kHz 2ch x 8 ohms

<0.15% @ 420 watts 20 Hz to 20 kHz, both ch. driven.

Input CMRR

> - 76 dB @ 1 kHz.

Voltage Gain

x 37.75 (+31.5 dB)

Crossover

Adjustable High Pass and Low Pass filter per channel. Filter Types: 12dB/oct

2nd order, 18dB/oct 3rd order, 24dB/oct 4th order Butterworth and 24dB/oct

4th order Linkwitz –Riley.

Crosstalk

> -60 dB @ 1 kHz @ 100 watts power @ 4 ohms.

Hum and Noise

> -93 dB, “A” weighted referenced to rated power @ 4 ohms.

Slew Rate

> 12V/μs

Damping Factor (8 ohms)

> 255:1 @ 20 Hz - 1 kHz @ 8 ohms

Input Sensitivity

1.54 volts +/- 3% for 1 kHz 4 ohm rated power, 1.47 volts +/- 3% for 1 kHz. 2

ohm rated power

Input Impedance

12 kilohms, balanced and 6 kilohms unbalanced.

Current Draw @ 1/8 in VA (watts)

960 (535) @ 2 ohms, 615 (315) @ 4 ohms, 400 (200) @ 8 ohms

Current Draw @ 1/3 in VA (watts)

2065 (1360) @ 2 ohms, 1215 (735) @ 4 ohms, 740 (420) @ 8 ohms

Idle Consumption

160VA, 75 watts

Cooling

Temperature dependent variable speed 80 mm DC fan.

Controls

2 front panel detented attenuators, push-button navigation encoder to navigate

through the menus on the LCD screen for input mode, parametric EQ,

crossover HPF, Mode, LPF. and more.

Indicator LEDs

Five LED indicators per channel: Active, DC, Temp, Sig and ACL

™

Protection

Thermal, DC, subsonic, incorrect loads, under and over voltage

Connectors

Inputs: Dual Combination 1/4” XLR, Outputs: Three 4-pin twist-lock

connectors for 2 channels plus bridge.

Construction

18 ga. galvanized steel

Dimensions

3.5”x19”x 10.5” behind front panel + 0.6” for handle

Net Weight

5.62 kg (12.4 lbs.*)

Gross Weight

6.80 kg (15.0 lbs.)

Warranty

5 years

Rated power readings made with BW: <10 Hz to 22 kHz. All power measurements made @ 120 VAC or 240VAC.
2 ohm steady state sine wave power is time limited by circuit breaker and AC limitations.
*Net Weight does not include power cord.

Содержание Pro-LITE 2.0 / 3.0









































Результаты поиска

Содержание Pro-LITE 2.0 / 3.0

Отзывы:

Похожие инструкции для Pro-LITE 2.0 / 3.0

Бренды по названию

Популярные бренды

Crest Audio Pro-LITE 2.0 / 3.0, Руководство пользователя

Результаты поиска

Содержание Pro-LITE 2.0 / 3.0

Отзывы:

Похожие инструкции для Pro-LITE 2.0 / 3.0

Бренды по названию

Популярные бренды