2 of 3
CI350X01R1
PENDANT MOUNT
NOTE:
Ensure that the customer supplied pendant is
capable of supporting the weight of the luminaire.
STEP 1:
Size the pendant and locate the junction box
accordingly. Install a suitable Listed cord strain relief
bushing in the junction box, and feed the luminaire’s
supply cord through it. Tie an overhand knot in the
cord inside the junction box.
STEP 2:
Make wiring connections to the cord and supply
wiring per the
Electrical Connections
section.
STEP 3:
Attach the junction box cover/pendant assembly to
the junction box using customer supplied screws.
STEP 4:
Secure the pendant to the luminaire mounting
bracket using a customer supplied suitable conduit
fitting. See
Figure 4.
HOOK AND CORD MOUNTING
STEP 1:
Push down on retainer spring until top of spring is
free of luminaire hook. See
Figure 5.
STEP 2:
Slide hook into securely mounted customer supplied
eye hanger and return retainer spring to original
position.
NOTE:
The luminaire should already be factory set
for correct balance. However, should you need to, the
luminaire may be balanced by loosening the hook
adjustment set screw on the top of the housing and
sliding the hook as necessary for correct balance.
Tighten hook set screw when finished. See
Figure 5.
STEP 3:
Install a suitable Listed cord strain relief bushing in
the junction box, and feed the fixture’s supply cord
through it. Tie an overhand knot in the cord inside the
junction box.
STEP 4:
Make wiring connections to the cord and supply
wiring per the
Electrical Connections
section.
ADJUSTABLE MOUNT
STEP 1:
Secure the top of the Adjustable Arm to mounting
surface with screws (not supplied).
STEP 2:
Make wiring connections per the
Electrical
Connections
section.
4
Luminaire Mounting
Bracket
Conduit Pendant
(Customer Supplied)
Conduit Fitter (Customer
Supplied)
5
Hook Adjustment Set
Screw
Retainer Spring
6
Adjustment Arm
