Note the way the bricks are positioned in the heater. Otherwise they
will not fit.
9
11
Now, place in position the front rank of bricks, again
pushing them back to make room for the front insulation
slab which is attached to the front panel.
Temporarily remove one central element to provide
access for the rear rank of bricks.
Loosen terminals on one of the elements and remove this to
allow installation of rear rank of storage bricks. On heaters
with 3 or 4 elements remove one of the central ones.
8
10
Put in place the rear rank of bricks, pushing them well back
against the rear insulation. Replace the element, making
sure that the connection is tight.
