background image

 - 1 -

Eco-Response Radiator
Models: ER300, ER400 and ER500

Installation Instructions

86576    Issue 1

Dimensions 

(including clearances diagram)

(millimetres)

Models

Specification

ER300

1.3kW / 0.28kW

ER400

1.95kW / 0.34kW

ER500

2.6kW / 0.39kW

THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE

NOTE ALSO THE INFORMATION GIVEN ON THE APPLIANCE

These instructions should 

not 

be left with the user, as this would invite the dismantling and servicing by unqualified persons.

There is a separate instruction leaflet which should be left with the user explaining how the radiator should be operated.

IMPORTANT SAFETY ADVICE

WARNING - 

This radiator is VERY HEAVY.  In order to maintain stability and to ensure its future safety in use, it is essential

that the radiator is FIXED SOUNDLY TO A WALL and that the feet are mounted on a FIRM, LEVEL SURFACE.  Care should

be taken to avoid irregular surfaces, such as may result from tiled surrounds partially protruding under the radiator.  It is

important that the following instructions are strictly followed.

WARNING 

– It is important that the fixing device chosen is appropriate to the wall material to which the radiator is being

fixed.  Some modern internal building materials are very low density block and require specialised fixing devices to

provide a safe, secure installation.

WARNING

 – If during any reassembly of the radiator, a part of the thermal insulation shows damage or deterioration which

may impair safety, it should be replaced with an identical part.

WARNING 

– This radiator must not be located below a socket outlet.

Suggested Wall Fittings 

(see page 7 for further information)

Solid brick/block:

  No. 10 Rawlplug fibre inserts (provided).  5.5mm drill bit.  Drill 8mm deeper than rawlplug length.

Plasterboard:

  If possible locate studding and use No. 10 woodscrews directly into the wood, otherwise M5 intersets.

For other wall types seek specialist advice.

DO NOT COVER OR OBSTRUCT

 the surfaces of the appliance.

DO NOT POSITION

 under windows where curtains may contact the radiator (see minimum clearances above).

DO NOT PLACE OBJECTS

 in contact with the radiator.

Wall, Curtains or Furniture

Curtains

Shelf or Overhang

Furniture
or other
obstruction

110mm

150mm
min.

250mm
min.

75mm
min.

75mm
min.

A

B

C

TO ENSURE THIS APPLIANCE IS OPERATING CORRECTLY, IT IS ESSENTIAL TO PERFORM THE CHECK PROCEDURE DETAILED ON

THE BACK PAGE OF THIS INSTRUCTION. THIS MUST BE COMPLETED BEFORE NORMAL OPERATION COMMENCES.

Model

Height A

Width B

Depth C

ER300 712mm

600mm

130mm +10mm

ER400 712mm

830mm

130mm +10mm

ER500 712mm

1050mm

130mm +10mm

Содержание Eco-Response ER300













Отзывы: