- 8 -
Electrical Connection
WARNING – THIS APPLIANCE MUST BE EARTHED
The installation of this appliance should be carried out by a competent electrician in accordance with I.E.E. Regulations for Electrical
Equipment. The radiator is
fi
tted with two
fl
exible cables for connection to the
fi
xed wiring of the premises through suitable connection
boxes positioned adjacent to the radiator. Each supply circuit to the radiator must incorporate a double pole isolating switch having a
contact separation of at least 3mm. This radiator is
not
suitable for connection to a 30A ring circuit.
THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE
NOTE ALSO THE INFORMATION GIVEN ON THE APPLIANCE
IMPORTANT SAFETY ADVICE
WARNING -
This radiator is VERY HEAVY, it is essential that the radiator is FIXED SOUNDLY TO A WALL and mounted on a
FIRM, LEVEL SURFACE.
WARNING
– Choose the appropriate
fi
xings to securely attach the radiator to the wall;
Suggested Wall Fittings
(see page 5 for further information)
Solid
brick/block:
Size 10 plastic inserts (provided). 8mm drill bit. Drill 15mm deeper than insert length.
Plasterboard:
If possible locate studding and use No. 10 woodscrews directly into the wood, otherwise M5
intersets.
For other wall types seek specialist advice.
WARNING
– If during any reassembly of the radiator, a part of the thermal insulation shows damage or deterioration which may
impair safety, it should be replaced with an identical part.
WARNING
– This radiator must not be located below a
fi
xed socket outlet.
WARNING
- in order to avoid overheating, do not cover the radiator.
DO NOT COVER OR OBSTRUCT
the surfaces of the appliance.
DO NOT POSITION
under windows where curtains may contact the radiator (see minimum clearances on Page 3).
DO NOT PLACE OBJECTS
in contact with the radiator.
This appliance is not intended for use by persons (including children, who should be supervised) with reduced physical, sensory
or mental capabilities, unless supervision or instruction has been given concerning use of the appliance by a person responsible
for their safety.
DuoHeat Radiators are not suitable for installation in bathrooms, shower rooms etc. or in areas of high humidity.
TO ENSURE THIS APPLIANCE IS OPERATING CORRECTLY, IT IS ESSENTIAL TO PERFORM THE CHECK PROCEDURE DETAILED
ON THE BACK PAGE OF THIS INSTRUCTION. THIS
MUST
BE COMPLETED BEFORE NORMAL OPERATION COMMENCES.
ATTENTION : IN ORDER TO AVOID OVER HEATING DO NOT COVER THE HEATER
Energy Retention Cells
Energy retention cells are supplied separately to the radiator in packs of two.
The reference number is
75-779999
.
ER300
8 Cells (4 Packs)
ER400
12 Cells (6 Packs)
ER500
16 Cells (8 Packs)
Содержание 75773301
Страница 4: ... 4 2 1 6 4 1 2 10mm 10A 10B 2 1 2 2 2 5 ...
Страница 5: ... 5 30mm 10E 10F 11A 11c 11D 12A 12B 12C 13 ...
Страница 6: ... 6 16 14 15A 15B 18B 18 18A ...
Страница 7: ... 7 2 1 19A 19B 19C 19E 19F 19D 19G 19H ...