SPECIFICATIONS
CRT-350-NJ10
5/17
2 Product Model
CRT-350-N
3 Product Principal Feature
The product is an ATM-oriented card reader supporting magnetic stripe card & contact IC card.
1) R/W magnetic stripe card & IC card with 2 PSAM card slots.
2) Electronic control shutter, unlock shutter via mag-stripe card detected or switch.
3) Auto capture from front, eject card from front, retrieve card from rear, jittery card front insertion
4) Communication protocol complied with the requirement of banking self-service kiosk.
5) CE & RoHS approved.
6) Power down protection.
7) EMV 4.2 Level 1 & PBOC 3.0 Level 1 certified.
3.1 Card Transmission Function
Auto capture from front, eject card from front, retrieve card from rear, jittery card front insertion
Motor drive
Rubber-wheel friction drive
3.2 R/W Mag-stripe Card
Support R/W 3 tracks below:
ISO/IEC Track1
ISO/IEC Track2
ISO/IEC Track3
R/W mag-stripe card, support 300oe LOCO or Hi-Co mag-stripe card.
3.3 Communication Function
RS-232
Asynchronous half duplex communication
Interface
:
DB-9pin male socket
3.4 Electronic Control Shutter
Electronic control safety shutter is in close status (Default).
Unlock the shutter via command
3.5 Pre-detect the Magnetic Signal
Support ISO/IEC Track2 or ISO/IEC Track3 Unlock the shutter when magnetic signal detected.
Support ISO/IEC Track1 or ISO/IEC Track2 or ISO/IEC Track3 Unlock the shutter when
magnetic signal detected (Optional).