CREATOR CHINA 2013-08 WWW.CREATOR1997.COM
10
Handheld Wireless Programmable Touch Screen User's Manual
1.Open or create a new TPG project, edit and
save, as shown in figure 2-19:
Figure 2-19
2.Select “Transfer→Send to Panel "(Figure 2-21),
or directly click on the shortcut button on tools
panel to update the current editing project to the
touch
screen.
User
can
also
choose"
Transfer→Send File to Panel ", then pop-up
"open" dialog box, select the project file saved to
disk, and then click "open" button, as shown in
figure 2-22:
Note:
If the USB data lines are not connected
properly or touch screen driver is not installed
properly, when update the data, ThinkDraw
software will display as shown in figure 2-20:
Figure 2-20
Figure 2-21
Figure 2-22
3.PC editing software ThinkDraw and touch
screen
will
display
synchronous
data
transmission schedule, as shown in Figure 2-23,
figure 2-24:
Figure 2-23
Figure 2-24
Where Version stands for the system version, File
size refers to the size of updated data. Status is
the touch-screen current status. Progress bar
shows the current update schedule.
4. After receiving the data, touch screen appears
the interface as shown in Figure 2-25 interface,
