Creator CR-SC-390, Руководство пользователя

Страница: 24 / 30

CREATOR CHINA 2011-08 WWW.CREATOR1997.COM
17 Professional SDI/DVI/HDMI Switch Scaler User’s Manual
Set network
parameters
value
wrongly
Out of range!
Set network
successfully
NETSET:OK
Remarks: Remarks: Remarks: Remarks: When When When When network parameters value is wrongly set, the system will return as “Out of range!”;
when the network is set successfully, the system will return as “NETSET:OK”.
4.9
4.9 4.9
4.9 Network
Network Network
Network Inquiry
Inquiry Inquiry
Inquiry Command
Command Command
Command
ASCII
command
(computer to
switch scaler)
Command function Return (switch scaler to computer) Example
<^SPORT> Inquire working port SPORT:[X12] <^SPORT>
<^SIPR> Inquire IP SIPR:[X12].[X13].[X14].[X15] <^SIPR>
<^SUBR>
Inquire current network
subnet mask number
SUBR:[X12].[X13].[X14].[X15] <^SUBR>
<^GAR>
Inquire current network
gateway number
GAR:[X12].[X13].[X14].[X15] <^GAR>
<^SHAR>
Inquire current network
MAC address number
SHAR:[X12].[X13].[X14].[X15].[X16].[X17] <^SHAR>
4.10
4.10 4.10
4.10 Network
Network Network
Network Interface
Interface Interface
Interface Default
Default Default
Default Parameters
Parameters Parameters
Parameters
Switch scaler’s network port number: 5000
Switch scaler’s network IP: 192.168.0.2
Switch scaler’s network gateway number: 192.168.0.1
Switch scaler’s network subnet mask: 255.255.255.0
Switch scaler’s network MAC address: 0x00.0x11.0x22.0x33.0x44.0x55;
Note: you need to restart the switch scaler to enable all the set network parameters.
4.11
4.11
4.11 4.11 Equipment
Equipment
Equipment Equipment Status
Status
Status Status Reading
Reading
Reading Reading
Command Command Command Command
command: ~read stauts!
Reply format as follows:
Input: VGA
Input Format: NO INPUT
Output: DVI
DVI Output Format: 1024x768x60HZ