CREATOR CHINA 2014-07 WWW.CREATOR1997.COM
11
CR-iMAX901HD Multiple Signals Scaler User’s Manual
Image adjustment commands
Command
Response
Description
Auto Adjust*
>VGA Input Auto Adjust
VGA Image auto adjust
*
>VGA Input V Start + 1
Move the VGA input image one column up
VStart-*
>VGA Input V Start - 1
Move the VGA input image one column down
*
>VGA Input H Start + 1
Move the VGA input image one column left
HStart-*
>VGA Input H Start - 1
Move the VGA input image one column right
*
>VGA Input H Total + 1
Add 1 column to the total of VGA input images
HTotal-*
>VGA Input H Total - 1
Remove 1 column of the total of VGA input images
Brightness 000*
>Brightness Value: 000
Set Brightness
Brightness*
>Brightness Value: 000
Read Brightness
Contrast 000*
>Contrast Value: 000
Set Contrast
Contrast*
>Contrast Value: 000
Read Contrast
Other commands
Command
Response
Description
<DEFAULT>
>DEFAULT OK
Restore factory defaults in next charge
<COPYEDID>
>COPY EDID OK
Copy EDID display device to HDMI
interface
<SIPR[192-168-1-190]>
>SIPR:192.168.1.190
Set the IP address
<GAR[192-168-1-1]>
>GAR:192.168.1.1
Set the gateway address
<SUBR[255-255-255-0]>
>SUBR:255.255.255.0
Set the subnet source address
<SPORT[6666]>
>SPORT:6666
Set the port number
<SIPR>
>SIPR:192.168.1.190
Query the IP address
<GAR>
>GAR:192.168.1.1
Query the gateway address
<SUBR>
>SUBR:255.255.255.0
Query the subnet mask
<SPORT>
>SPORT:6666
Query the port number
<BellOn>
>Bell On
Open the buzzer
<BellOff>
>Bell Off
Close the buzzer
<BellStatus>
>Bell Status: ON
Query buzzer status
<SW>
>LPMCU SW Versions: V1.0
>FPMCU SW Versions: V1.0
>FLMCU SW Versions: V1.0
Check the software version
