CREATOR CHINA 2014-07 WWW.CREATOR1997.COM
6
CR-iMAX901HD Multiple Signals Scaler User’s Manual
用户手册
3,Setting the menu options
Step one:
press any button to light up the LCD
screen,then press the “MENU”to enter the menu
option.
Step two:
turn the PARAMETER knob to select
the needed setting item, then press “ENTER” to
enter.
Step three:
after entering the Selecting Setting
Item, turn the PARAMETER knob to select the
desired
setting
parameters,and
then
press
“ENTER”to confirm the selection. Each press of
LCD screen,it will display the corresponding
parameter information.
Step
four:
when
you
need
to
set
many
parameters,just press the “MENU”to return to the
previous menu after confirming each parameter,
then you just need to repeat the operation of the
second, third and fourth steps.
If the current operation is in the menu
structure (as shown below), press “MENU” to
return to the previous menu. If the current
state is audio and video channel switch, press
“MENU” to display the main menu page of
scaler.
2.4.4 Operation examples
Such
as:set
the
output
resolution
to
1280X1024@60Hz,the brightness to 60 and
adjust the output volume to + 10.5dB.
1.Press “MENU” to enter into the menu option
settings
to
set
the
resolution
to
1280X1024@60Hz, LCD will display as follows:
Press “ENTER” to enter into the menu option
settings, turn the PARAMETER knob to set the
“OUTPUT Format”parameter. For example: when
you enter the menu, the resolution will display as
1920X1080@50Hz.
3.The LCD display shows the current status of the
option,then turn the PARAMETER knob to select
the desired parameter 1280X1024@60Hz.
4.When you selected the parameters,press
“ENTER”to confirm the changes,LCD screen will
display the setting parameters.
5.Set the brightness parameter to 60. After you
setting the resolution,press the “MENU” to return
to
the
previous
menu
option,turn
the
PARAMETER knob to select until the LCD screen
display the “Image Setting” option.
