Creator C310+ BM Multi-system Scanner
7
3) Confirm that the vehicle is OBD2 compliant;
4) Turn the ignition off and wait for about 10
Seconds;
5) Turn on the engine again and continue
testing;
6) confirm that the control module was not
damaged;
Scan tool doesn’t power up
If the scan tool can not power up or operates;
You need to check the following:
1)Check if the scan tool’s OBD II connector
is securely connected to the vehicle’s DLC;
2)Check if the DLC pins is curved or broken.
Clean the DLC pins if necessary ;
3)Check if the vehicle battery is good and at
least 8 volts;
