24
2.
In the
Config Management
section:
•
When
Default
is clicked, all parameters are restored to default factory
settings, except the administrator login password, network port
parameters, system time, admin password, and activation password.
•
If the
Restore all settings to defaults without keeping current network and
user settings
checkbox is selected, when
Default
is clicked, all parameters
are restored to default factory settings. After this, a prompt asking you to
change the activation password is displayed on the GUI.
4.12.2 Upgrading the Firmware
Once a new firmware is available, you can upgrade the firmware of the device. Make
sure that the power supply is normal during the upgrade process. The device will
restart after the upgrade process is completed.
1.
Go to
Setup > System > Maintenance
.
2.
In the
Software Upgrade
section, click
Browse
and select the correct upgrade
file.
3.
Click
Upgrade
and then confirm to start.
4.
In some cases, you may need to restore the device to default settings after
upgrading it. On the Maintenance page, in the
Config Management
section, click
Default
to start the process.
Note
: Do not select the
Restore all settings …
checkbox.
4.12.3 Exporting Diagnosis Information
Diagnosis information includes logs and system configurations. In case your device
