Creative PC-CAM 880, Руководство пользователя, Страница: 23 / 54

Installing Creative PC-CAM 880 1-12
For Windows XP only
9. The Found New Hardware message box
(Figure 1-12) appears on your Windows
taskbar, telling you that Windows has
detected your camera.
10. When a fifth message box appears, telling
you that your new hardware is installed and
ready to use, press the Mode button on your
camera. Your camera’s LED indicator lights
up in green. Software installation will be complete in a while.
11. If your computer opens PC-CAM Center, Kodak Imaging or a Scanners and Cameras dialog box,
close the application or dialog box.
If Windows starts copying captured images to your computer, click the
Cancel button.
12. When the Found New Hardware Wizard dialog box appears, select Install the software
automatically ( Recommended ), and then click the Next button.
13. If a Hardware Installation dialog box
(Figure 1-13) appears, click the Continue
Anyway button. For more details on this
warning message, see “Problems in
Windows XP” on page B-3. Installation will
be complete in a while.
14. Click the Finish button and restart your
computer if you are prompted to do so.
Figure 1-12: Found New Hardware message box
Figure 1-13: Hardware Installation dialog box