Creative PC-CAM 550, Руководство пользователя

Страница: 14 / 50

Installing PC-CAM 550 1-3
Buttons and
LCD on PC-
CAM 550
The following section explains the functions of the buttons and LCD on
your PC-CAM 550. Refer to Figure 1-1 and Figure 1-2 for the location of these
buttons and LCDs on your camera.
Buttons The following buttons are found on your PC-CAM 550:
❑
Power button
To turn on your camera, press this button. You can only turn on your camera
when it is disconnected from the computer.
To turn off your camera, press and hold this button for two seconds.
Note: The camera will turn itself off if it is left idle for three minutes.
❑
Operation Mode button
This button will change the camera’s operation mode each time it is pressed.
There are six modes of operation: Single snapshot (normal resolution), Single
snapshot (high resolution), Single snapshot (low resolution), Self-timer single
snapshot (normal resolution), Self-timer single snapshot (high resolution) and
Multiple snap shot. To erase all the data from your camera, press this button
together with the Snapshot button.
❑
Flash Mode button
This button will change the camera’s flash mode each time it is pressed. There
are two flash modes: Auto and Disabled. To delete the last file from the
camera, press the Flash Mode button and Snapshot button simultaneously.
❑
Snapshot button
This button is used for taking photos. It is a two-stage button. Pressing the
button halfway (the first stage) will allow the camera to make the necessary
adjustments for flash and exposure. Pressing the button completely (the
second stage) allows the camera to take a picture.