User Manual for Handheld Pulse Oximeter
10
and the temperature unit "
℃
" is blinking, the user can begin to
take the measurement.
3. Insert the tip of the temperature probe into the earhole and
press the measuring key to start the measurement. A short beep
means the measurement has finished and the result will be
displayed on the big display screen on temperature probe and
the display screen of the Oximeter.
Note:
If the temperature probe detects a hardware failure, the display
screen on the infrared temperature probe will show "Err" and
will not enter into measurement mode.
The infrared temperature probe will switch to standby state
automatically if there is no operation for 1 minute. If a further
measurement is needed, press the measuring key and repeat
step 2 and step 3.
Normal body temperature varies depending on the position/area
the measurement is taken from. The following table shows the
varying temperature ranges of the different body positions.
Temperature varying range at different body positions:
Arm
34.7 ~ 37.3
℃
Oral
35.5 ~ 37.5
℃
Rectal
36.6 ~ 38.0
℃
Ear
35.8 ~ 38.0
℃
Safety Instruction for Temperature Measurement
Do NOT take a measurement when the patient is moving.
Patients with tympanitis or otitis problems should NOT use
this device.
When the infrared temperature probe is connected to the
device, the probe will consequently be at power-on status,
