3
En
Using headphones
❒
For private listening, you can
connect headphones to the
Headphones Output
of the
remote control.
This will mute all speakers.
❒
Select
MASTER
volume mode
to adjust the volume of your
headphones.
❒
Select
TREBLE
mode to adjust
the treble levels of your
headphones.
❒
Select
SUB
mode to adjust the
bass levels of your headphones.
Notes
•
When you disconnect your headphones
from the
Headphones Output
, the
speaker system will revert to the default
MASTER
volume setting (two
Level
Indicators
lit), so as to prevent high
headphones volume levels from being
applied to the speaker system.
•
REAR
mode and
CENTER
mode are
disabled when you are using headphones.
Muting the volume
❒
To temporarily mute speakers or
headphones, press the
MUTE
button once.
All lit
Level Indicators
will
blink during mute mode.
❒
To return to normal listening,
press the
MUTE
button again.
Alternatively, you can disable
mute mode by pressing either
or .
Understanding
Input Connectors
Figure 2: Input connectors on the rear panel
MegaWorks THX 6.1 650D provides
three sets of input connectors:
❒
6.1 Analog inputs for up to 6.1
channels
❒
Auxiliary Analog Stereo input
for up to 2 channels
❒
Digital input for up to 5.1
channels from multichannel
audio cards with digital output.
See “Connecting Input Devices” on
page 4 for details of cable
requirements. Basic cables for all the
inputs are supplied.
Note:
In certain situations, you may
require additional cables that are not
provided.
MWorks THX 650D CLE.book Page 3 Wednesday, January 8, 2003 10:03 AM
