background image

17

Creative Labs (Ireland) Limited (“Creative”) warrants to you, the original
purchaser only, that the hardware product will be free of defects in materials
and workmanship for a period of two years after the date of purchase, or such
other period as may be required by applicable law (“Warranty Period”).
Creative’s entire liability and your remedy will be, at Creative’s sole discre-
tion, the repair or replacement (with the same or similar model of any
hardware or accompanying item(s) not meeting the “Limited Warranty”
explained above that is returned to Creative’s authorised distributor or dealer
during the Warranty Period with a copy of your receipt.

What this warranty does not cover

To the maximum extent permitted by applicable law, Creative disclaims all
other warranties and conditions, expressed or implied, including the condi-
tions of quality, merchantability or fitness for a particular purpose with respect
to the use of this product. Creative also disclaims any obligation to support
products for all operating environments - for example, by ensuring
interoperability with future versions of software or hardware. In no event shall
Creative or its licensors be liable for any indirect, incidental, special or
consequential loss or for any lost profits, savings or data arising from or
relating to the use of this product, even if Creative or its licensors have been
advised of the possibility of such loss.

Specifically, this warranty does not cover failures of the product which

result from accident, abuse, misuse, alterations (by persons other than Creative
or its authorised repair agents), moisture, corrosive environments, shipping,
high voltage surges, or abnormal working conditions. This warranty does not
cover normal wear and tear. You are specifically advised to take a backup copy
of any software provided with the Creative product for security purposes.
Note: This warranty gives you specific legal rights. You may have other rights
which vary from country to country. Certain limitations in this warranty are
not permitted by the jurisdiction of some countries, so some limitations here
may not apply to you.

Limited Warranty

Note: Creative may replace or repair the product with new or reconditioned
parts and the faulty parts will become the property of Creative. The warranty
period for your repaired/replacement items is 90 days from the date of
shipment from Creative, or what is left on the original item’s warranty, which
ever is longer.

To avoid tariffs when shipping a product to Creative Labs from outside the

E.U., you must complete the relevant customs documentation before shipping
the product (please allow 30 Days).

Содержание Four Point Surround FPS1000



















Отзывы: