Troubleshooting and Support
This chapter provides solutions to issues that may be encountered during the installation or usage of
your Sound Blaster Free.
1. The Sound Blaster Free does not power on.
The Sound Blaster Free is designed to be powered on simply by the built-in battery. Make sure that it is
charged. When charging the battery, check the following:
l
Tighten the USB connection at both ends of the cable.
l
The USB cable may be faulty. Replace the cable with a working USB cable.
l
Your computer's USB port may be disabled, or faulty or requires a driver update. Check your
computer's hardware device manager to determine the working status of your USB port. Enable
your USB port and/or update its driver.
If the problem persists, connect the Sound Blaster Free to a different USB port.
If you are connected via a USB Power Adapter, please check that all cables are tightly connected and
the power socket is turned on.
2. I am having difficulty in linking up my
Bluetooth
device with Sound Blaster Free.
Ensure that your
Bluetooth
enabled device supports A2DP profile.
Please also try the following steps:
l
Make sure that
Bluetooth
is enabled (turned on) on your device.
l
On some devices, ensure that the
Sound Blaster Free
is selected as the default headset / wireless
stereo audio playback device.
l
Make sure that there are no other wireless devices within a 10 meter radius when pairing.
l
Position them within 1 meter or closer to each other if you experience pairing difficulties.
l
Check if you have input the correct passcode/pin number (0000) on your
Bluetooth
device.
l
Ensure that both, your
Bluetooth
device and Sound Blaster Free are not connected to any other
devices.
l
Restart your
Bluetooth
device or pair the devices again.
3.
Bluetooth
link is established and paired between the devices but there’s no music.
Ensure that the device’s volume is not set to minimum or muted. Also, make sure that the built-in music
player is not in use.
With some built-in
Bluetooth
enabled computers or 3rd party USB
Bluetooth
dongles, you may be
required to manually specify/set-up the audio output as the Sound Blaster Free (under sound and audio
devices section) on your computer’s operating system.
Note:
Audio transmitted from your Sound Blaster Free may be slightly delayed; this is due to the
characteristics of
Bluetooth
technology.
4. There is no audio output from the Sound Blaster Free.
Check speaker connection:
l
Make sure
Bluetooth
is turned on and in range.
l
Unplug the USB cable from the computer and plug it in again.
l
Make sure the cable from your line-in device is properly plugged in.
l
Ensure that the format of the audio files from the SD card is supported.
Troubleshooting and Support
25
