Creative Audigy 2 ZS, Руководство пользователя

Страница: 17 / 76

Step 2: Prepare your Platinum Drive
This step only applies if you are installing the Platinum Drive (included with Audigy 2 ZS Platinum). If you are not installing the
Platinum Drive, go to
Step 6: Install the audio card .
There are two types of microphones that can be connected to your Platinum Drive: dynamic microphones and condenser microphones.
By default, your Platinum Drive is set for use with a condenser microphone. To use a dynamic microphone, you must place the provided
shunt onto
Jumper JP1 of your Platinum Drive.
Component
1. Shunt
2. Jumper JP1
To use a condenser microphone, remove the shunt from Jumper JP1.
Component
1. Shunt
2. Jumper JP1
Note
The Jumper JP1 may not be available on certain models of the Platinum Drive.
The shunt for Jumper JP1 can be found together with the packet of screws provided.