© Copyright 2018, Creative Playthings
WILLIAMSBURG PREMIUM PACK 10
WILL9WPP10-100 Rev A (04-18)
Page 2
Gable Fan
Monkey
Bars
Sliding Pole
Swing Beam
Dormer
Rock Climbing
Wall
Clubhouse
Panels
• Install the Rock Climbing Wall (AH-201Q) in the postion
shown.
• Position the access ladder as shown. Secure the access lad-
der using the method shown in step 17 of the Williamsburg
instructions. Mount the brackets on the inside of the rails.
• Fasten the Access Ladder Handles (AG942-400) to the Ac-
cess Ladder.
• Install Monkey Bars (63079-102) on the front of the tower.
Mount one side directly to the post.
• Install the slide mount and slide using the method shown in
steps 23 and 24 of the Williamsburg instructions.
• Mount the Fireman's Pole (AA917-603) to the corner post
as shown.
• Install wall slats in the postions shown on the front and back
page, using the methods from the Williamsburg Instruc-
tions. Gaps must be narrower than 3-1/2" or wider than 9"
to prevent potential head entrapment.
• Mount one hand grip to an entrance wall slat to the right of
the ladder. Mount the other hand grip to the adjacent post at
the same height, using 1/4 x 1-1/2" lag screws and 1/4" flat
washers. Drill 3/16" diameter pilot holes for the lag screws.
• Mount the Slide Handle (AG943-400) above the Super
Wave Slide.
• Double-check all fasteners are secure and all recessed
hardware is covered by hole caps.
