© Copyright 2018, Creative Playthings
LEXINGTON PREMIUM PACK 14
LEXI9WPP14-100 Rev A (04-18)
Page 2
• Using a ladder, install the Dormer (SM963-402) in the po-
sition shown. Ladder access may be obstructed by later
installations.
• Install the Play Floor (SC910-800Q).
• Install the Play Walls (SC909-800Q) along the back, front,
and swing side of the gym.
• Install the Pinnacle Climber (SH304-101Q) on the end op-
posite the swings.
• Set the Ramp, Access Ladder and Slide as shown on the
first page of this guide. Check spacing.
• Install the Ramp (SH922-800Q).
• Secure the access ladder using the method shown in step
17 of the Lexington instructions.
• Fasten the Access Ladder Handles (AG942-400) to the
Access Ladder.
• Install the slide mount and slide using the method shown
in steps 23 and 24 of the Lexington instructions.
• Install wall slats in the postions shown in images, using the
methods from the Lexington Instructions. Gaps must be
narrower than 3-1/2" or wider than 9" to prevent potential
head entrapment.
• Mount the hand grips to the entrance wall slats.
• Mount the Slide Handle (AG943-400) above the slide.
• Double-check all fasteners are secure and all recessed
hardware is covered by hole caps.
Swing Beam
Pinnacle Wall
Gable Fan
Play Walls
