pg 5 of 6
REF: PB114 - WEATHER STATION
Attach End Caps to timber
Attach Playtec to timber uprights
Concrete timbers into ground as specified on PG 4
1
2
BEFORE TIMBER IS PLACED INTO
GROUND:
FIX END CAP TO TIMBER USING 2X FM80
BRASS SCREWS.
USE THE MIDDLE HOLE AS A GUIDE -
DRILL DOWN 100MM
(using 10mm drill bit)
WINDSOCK ROD TO BE GLUED INTO THE
TIMBER
(Glue to be placed in drilled 100mm hole
- not on end cap.)
BEFORE TIMBER IS PLACED
INTO GROUND:
FIX END CAP (WITH ATTACHED
ANEMOMETER) TO TIMBER
USING 2 X FM80 BRASS
SCREWS
Attach using 6x FM80
BRASS SCREWS
Installation Instructions
100mm
465mm
TOP EDGE OF BOARD
INLINE WITH TOP OF
TIMBERS
