Attach the 2 x 90mm x 90mm timbers to the ramp
assembly
using 180mm brass screws (2 for each support)
Attach the ramp assembly to the Octagonal Shelter
surround
using angle cleats / bractets and 80mm brass screws
REF: CP001/OCT - ADDITIONAL OPTIONS & ADD ONS
pg 5 of 5
Assembly Instructions
1
2
1-2 deck boards will need to be removed to gain
access to the angle brackets
ENSURE the centre support post is positioned in the
centre of the octagonal shelter surround
The deck board (when replaced) will finish level/
flush with the top of the octagonal shelter surround
