Page 2
`
UBi
©2022 All rights reserved. All specifications are subject to change without notice.
Creative Lighting 4 Pine Street North Ipswich QLD Australia
Email: [email protected] www.creativelighting.com.au +617 32828777
DALI Line Power Supply
The UBi comes in two versions: Powered, and non-Powered. The UBi Power provides DALI power of
20.5V and 245mA. Both versions require 24Vdc in.
Warnings
•
DO NOT connect onto any DALI line when the overvoltage indicator is lit.
•
DO NOT rely on the indicator
–
always check voltage on the line by use of suitable test tool,
such as Fluke meter and Control Freak ADDICT, with mains-rated leads and connectors,
such as the Control Freak 600VAC Universal Lead set, via the 4mm banana sockets
provided on the front of the UBi.
•
ALWAYS treat DALI as having mains voltage potential. Even though DALI operates on SELV
DC, it can accidentally have mains voltages present.
Compliance
The UBi is safety certified and immune to mains voltages.
The UBi complies with
AS/NZS 61347.2.1
EN 55015 + A1
A1.
EMC: C Tick and CE.
Wiring
It is recommended for convenience that you terminate DALI cabling from the DALI controller into
one of the 2-way DALI terminals and separately terminate the DALI cabling out to the DALI devices
using one or more of the remaining 2-way terminals.
Each 2-way DA terminal has a positive and a negative and these are in parallel with the other 2-
way terminals.
Note that DALI does have polarity, however, is not polarity-sensitive.
CAD
Creative Lighting can provide CAD blocks and drawings for the UBi and our other
products on request.
