TV TYPE
Correct Resolution
Setting
If your TV is a standard-definition
NTSC TV (American, Asian SD TV)
If your TV is a standard-definition PAL
TV (Euriopean SD TV)
If your TV is an enhanced-definition
TV (EDTV)
If your TV is a high-definition TV
(HDTV) capable of 720p only
If your TV is a high-definition TV
(HDTV) capable of 1080i only
If your TV is HDMI equipped, and if
your TV is a high-definition TV (HDTV)
capable of 1080p [any frame rate], and
you are connected to your TV via HDMI,
If your TV is HDMI equipped, and you
are connected to your TV via HDMI, and
you wish the BD player to set the output
based on information exchanged between
the TV and the player over the HDMI cable.
480i
576i
480p/576p
720p
1080i
1080p
HDMI auto
2.3 Resolution
Resolution:
select the output resolution based on
the type of TV connected to the player, as described
in the table below:
2. DISPLAY MEMU
Note:
If your player is connected to the TV via HDMI,setting
the display correctly should not be necessary. The
player and your TV will communicate to each other
and set the display accordingly. This section is
mainly intended for users who have connected their
TV via the component output, or for advanced users
with HDMI Tvs.
Setup Menu
Language
Display
Audio
Parental
System
Network
TV Type
TV Aspect
Resolution
Film Mode
PAL
16:9 Wide
HDMI Auto
Off
SYSTEM SETUP
19
2.1 TV Type
TV Type:
This player supports different TV output,
including NTSC and PAL systems.
Setup Menu
Language
Display
Audio
Parental
System
Network
TV Type
TV Aspect
Resolution
Film Mode
NTSC
PAL
TV Type Settings
If your TV has a very rectangular (16:9) aspect ratio,
you will need to choose one of the 16:9 aspect ratios.
If your TV has a relatively square (4:3) aspect ratio,
you will need to choose one of the 4:3 aspect ratios.
Note:
Setting the player for one of the 16:9 settings
when connected to a 4:3 TV, or setting the player for
one of the 4:3 settings when connected to a 16:9 TV
will result in unpredictable results.
In the standard-definition(576i/576p/480i/480p) mode,
the BD player have 16:9 and 4:3 aspect ratio.
In the high-definition(720p/1080i/1080p) mode, the
BD player have only 16:9 aspect ratio.
2.2 TV Aspect
TV Aspect:
Select the picture size according to the
aspect ratio of the connected TV. You can select:
16:9 Pillarbox, 4:3 Pan & Scan, 4:3 Letter Box, 16:9
wide.
Setup Menu
Language
Display
Audio
Parental
System
Network
TV Type
TV Aspect
Resolution
Film Mode
HDMI Auto
1080p
1080i
720p
576p
576i
Output Resolution: HDMI Auto
will select optimal resolution
Note:
The setting of the Blu-ray disc player should be in
accord with the disc format.
For example, if the disc format is PAL, you should
setting your player to PAL. If the disc format is NTSC,
you should setting your player to NTSC.
The picture quality will depend on the user correctly
selecting PAL or NTSC as appropriate. If the picture
is not fluent, please check and reset your player mode.
Setup Menu
Language
Display
Audio
Parental
System
Network
TV Type
TV Aspect
Resolution
Film Mode
16:9 Wide
16:9 Pillarbox
4:3 Letterbox
4:3 Pan and Scan
TV Aspect Ratio
