Import model fine-tuning
�. Click on the red marker.
�. Select the file in STL format and click open.
�. Click on the model and the red box icon appears.
�
Note：
�. The density is the filling of the model. The higher the density, the more the filling. The
general setting is between ��-��%. The filling structure is grid-like.
�. When setting the print speed, combining the size and difficulty of the model, generally set it
to ��-��mm / s, the difficulty of the model is larger or the size of the single side of the model is
less than �cm, and the print speed is generally ��-��mm / s. Character modeling, mesh
modeling, etc.
�. When selecting the support type, you can judge whether it is necessary to add “local
support”, “all support” or “none” by observing the model or slice interface, but in
principle, try to avoid or reduce the support. You can achieve this by rotating the model. The
purpose of avoiding or reducing support.
�. When selecting the platform attachment type, the "edge" or "mesh" can be appropriately
added according to the size of the contact surface between the model and the platform and
the height of the model.
