Step �
Platform adjustment
Slice software installation
Slice Software
Copy the slicing software file from the SD card into your comoputer and double-click the file.
�
Step �
Machine test
Leveling screw
File selection interface
Home
Print interface
Place the sprayed side of the glass platform face up on the printing platform, and then fasten the buckle. Click the leveling
button, place a piece of A� paper between the platform and the print head, adjust the screws below the platform (about �� °
each time), when the A� paper can be pulled out and there is some resistance. When adjusting the middle point, you need to
turn � screws at the same time for adjustment.
Click the print menu on the first page to enter the print file selection interface. After selecting the file, the printer will
automatically heat up and print.
Select the installation path of the slicing software, choose Typical installation, then click Next, and click Install. The software
is automatically installed to completion.
