CreatBot D600, Руководство пользователя

Страница: 37 / 40

- 36 -
not over 120℃, and you can close the bed above 100mm except printing ABS
or other high-temperature required filaments.
3. The model not stick on the platform ?
Please paste masking paper or Kapton tape on the platform , or the nozzle is
too far away from the platform, or the bottom of the model is not flat.
4 . No or less silk coming on the first layer ?
The distance between nozzle and platform is too small , or the filament has not
been sent to the nozzle .
5. Why nozzle is not spit silk ?
The filament is not pressed or too tight, or print temperature is too low, or the
filament feeder not working.
6 . How to prevent model become warped ?
Increase hot bed temperature or use Kapton, or change platform adhesion
type to Raft, or cover the baffle, or reduce indoor ventilation.
7 . How far from nozzle to platform appropriate ?
Distance should be 0 in theory , but there is no absolutely flat platform, so the
distance -0.1mm. Finally, with the actual printing effect as the
standard, too close will lead to a silk blocked, too far will cause the model not
stick on the platform.
8 . How to determine whether the
temperature
is too high ?
PLA temperature is too high will appear liquefaction , ABS will be the carbide ,
that will block the nozzle .
9 . What reasons will causing nozzle blocked ?
Filament are impurities or print environment dust too much, bad of thermal
conductivity between the nozzle and the heating block.
10 . Model surface is loose with crack ?
The layer is too high or the printing speed too fast, nozzle temperature too
low or filament press nut too loose, or filament is wrapped.
11 . How to print a small model ?
Multiple the model , and print them at a time.
12 . Dual color model not aligned ?
Adjust offset of second nozzle in machine settings .
13 . Dual color model color interference ?
Align two nozzle in vertical direction
14 . There is too much silk drag on the model ?
Please enable filament retraction, and specified proper retract speed, and
distance, the retract distance should not less than 4mm, and the speed not
less than 10mm/s.
Printing Troubleshoot
- 37 -
Specifications Specifications
Model F160 F430 D600
Build volume 160*160*200 400 * 300 * 300 600*600*600
Nozzles Single Single/Dual
Diameter 0.4mm(0 . 3/0.6/0.8/1.0mm can be customized)
Temperature 260(Max 420) ℃ 260 ℃ + 420 ℃
Nozzles Type Direct
Hot bed 140 ℃
Bed 12 0 ℃ /Air 70 ℃
100 ℃
Min . Layer 0.04mm
Accuracy X 、 Y 、 Z axis 0 . 01mm
Print Speed
120mm/s (inner/outter , top/bottom, fill, first layer speed can be set separately)
Travel Speed 200mm/s
Materials ABS,PLA,TPU,PETG,HIPS,PVA, PA,PC,Carbon Fibre,PEEK,etc
Fila . Diameter 1 . 75mm 3.0mm
Motion Structures
Optic axis Rectilinear orbit
Auto Turnoff Yes ( pwr manager + relay )
Continue Play Yes ( Power outage , lower plate and save data )
Fila . Check Yes ( pause printing when filament finish , and lower platform )
Adju . Head Yes ( height-adjustable-nozzles )
OS Windows, Linux, Mac OS, OSX
Languages Chinese , English multi - language
Software CreatWare Muti - language
File Format STL, OBJ, GCode, Amf
Printing Field Full closed covering
Display 4.3 inches color touch screen
Pwr Supply 110/220V 180W 110/220V 1300W 110/220V 1000W
Dimension 280*280*470mm 660*470*560mm 910*840*1100mm
Weight 22Kg 60Kg 170Kg