CreatBot D600, Руководство пользователя

Страница: 33 / 40

- 32 -
Align Dual Head Vertical
Software Opertation
Step 1: loose the screws on the back .
Step 2: raise or lower hotend with heads after cooling nozzle
Step 3: Lower left nozzle step by step same with right nozzle.
(Note: every time you raise or lower nozzle, you need to adjust the offset
value in autoleveling menu)
Tip
:
You can rising right nozzle as long time not use
.
Add Multi Type Printer
You can add more than one
type of CreatBot to the software, and
easily switch between them without
re-config all the different machine
F1000
F1000(1000*1000*1000)
F160(160*160*200 mm)
F430(400*300*300 mm)
PEEK-300(300*300*400 mm)
- 33 -
Software Operation
Align Dual Head Horizontal
There are alignment problem while printing dual color model, this is
because the small difference in multi-nozzle assembly, CreatWare built
fine - tuning features .
C
lick menu
"
Machine
">"
Machine settings
",
default X offset is
:
20
.
0
,
default Y offset is
:
0
.
0 , adjustment method as shown below :
Offset X： 27.7
Offset Y： -0.3
Extruder 2
Extr . 1
Extr . 2
Offset X： 28.3
Offset Y： 0.3
Extruder 2
Extr . 1
Extr . 2