3
Step Sequencer
Controls
Step Length: Selects the overall
resolution for the Step Sequencer (that
is, the smallest required note length). For
example, choose 1/16 if your shortest
step is a 16th note.
Possible values: 8/1, 4/1, 2/1,1/1, ½ dot,
½, ½ tr pl, ¼ dot, ¼, ¼ trpl,
1/8 dot, 1/8, 1/8 trpl, 1/16 dot, 1/16,
1/16 trpl, 1/32, 1/32 trpl, 1 Clock .
Values of the form x/1 are longer than a
beat. 4/1, then, indicates 4 beats per step.
Values with a „trpl“ are triplets. 1/4trpl
indicates a resolution of four triplets, or six
steps per bar. (in 4/4). Values with a „dot“
indicate a dotted note value. Therefore, 1/
4dot stands for a dotted quarter-note (= 3
eighth notes).
Set the actual length of the individual steps
under
Length per Step, where you can
enter a whole number multiple of the value
configured here for each step.
Step Loop: Switches loop playback on
or off.
Length: Select here the number of steps
to include in the loop (continuous loop).
SEQ 1 - 4: Multiple instances of the Step
Sequencer exist. Each instance is
assigned to one of the Instrument slots.
Use the switches - the number of which
depends upon the operating mode (
Single,
Multi) and the hardware version (Noah,
Noah EX) - to select the desired instance
for display and editing.
Activate SEQ1-4: Turn this switch on to
activate the step sequencer for the
corresponding slot. This is equivalent to
selecting the step sequencer as trigger
source in the MIDI Manager.
Activate SEQ1-4
