Outsight Pty Ltd
6/888 Bourke St, Zetland, Sydney NSW 2017, AUSTRALIA
+61-2-9699 8688
WIRED DMX CONTROL
Standard 5 pin XLR connectors are located on the back of the unit.
When a valid DMX signal is detected, the yellow DMX indicator LED will flash on the rear of the unit and the keypad controls for the light are
disabled. These are restored several seconds after loss of DMX signal. After around 15 seconds of valid DMX input the OLED Display will
power off automatically
–
press any key on the keypad to turn it back on again.
The desired DMX address can be selected from the main menu. Please see the DMX Implementation Tables for more information about the
channel mapping options.
As with all DMX installations, the last unit in the chain should be terminated. This can be done through the menu system, by selecting
MENU->Advanced->DMX Terminated.
WIRELESS DMX CONTROL
Every Space X unit has built in Wireless DMX control using the Lumen Radio system.
When a valid wireless DMX signal is present, the blue indicator LED will flash rapidly. The current signal level will also be displayed on the top
status area of the OLED screen
After around 15 seconds of valid DMX input the OLED Display will power off automatically
–
press any key on the keypad to turn it back on
again.
If wired DMX is connected at the same time as the Wireless DMX is receiving data, then the wired connection will take control.
The DMX address and scenario should be set in the same mannor as for wired DMX.
To unlink the Lumen Radio module, go to
Menu->Advanced->Unlink Lumen
Please see Lumen Radio documentation for more information about the wireless DMX system.
WIRED REMOTE DIMMER
The wired remote dimmer plugs into the 7 pin Accessory connector on the back of the unit. This will allow limited access to the menu system
of the unit for setup and also control of levels, cct, green/mag, hue, saturation and DMX address/Scenario.
RIGGING
Three rigging points are provided for attachement of the correctly rated safety cables to hang the unit. Make sure to use cables rated to
withstand the full weight of the unit: 18kg
Ensure that mounting point is safe and secure and is rated to take the full unit weight